 |
SHSS-8
SH
| Quantity: | |
|---|---|
Specification
Base length | 48cm/ 18.9inches | Material | Stainless steel (AISI201.304.316) |
Base width | 2cm/0.8inches | Color | Metal |
Diameter of spike | 1.6mm | Application Type | Physical Barrier |
Length of spike | 11cm/4.3inches | Pest Type | Birds, pigeon |
Spike number | 48 spikes | protection range | 13 cm/5.1inches |
Bird control spikes are an effective, humane and cost-effective bird control solution, which can keep birds from landing and roosting on unwanted areas but will not harm them. They are ready to use and easy to install without assembly required. Base sections can be glued, screwed, or tied down and nearly invisible.
Bird Spikes are ideal for use on ledges, roof lines, parapet walls, eaves, beams, windowsills, light posts, signs and more. The PC base is made from a non-conductive UV protected polycarbonate plastic that is not affected by extreme temperatures and will not break.
Humane - will not harm birds; Low cost effective solution that is virtually invisible.
Easy to install - can be glued, screwed, or tied down; Will not cut or injure installer.
One time solution- no maintenance required.
Installation
Step 1: Be sure that the area is clean, dry and free from bird droppings.
Step 2: Choose the tools you plan to use according to the base condition:
A. If using on a wooden or concrete surface, simply use the screw.
B. If using on a plastic surface, the spikes can be fixed in place with glue, plastic ties, or installation clamp.
Step 3: The first row of spikes are pasted on the front of the surface, so that it is fully protected by the spikes.
Step 4: Immediately replace the damaged spike before the birds move in.
Specification
Base length | 48cm/ 18.9inches | Material | Stainless steel (AISI201.304.316) |
Base width | 2cm/0.8inches | Color | Metal |
Diameter of spike | 1.6mm | Application Type | Physical Barrier |
Length of spike | 11cm/4.3inches | Pest Type | Birds, pigeon |
Spike number | 48 spikes | protection range | 13 cm/5.1inches |
Bird control spikes are an effective, humane and cost-effective bird control solution, which can keep birds from landing and roosting on unwanted areas but will not harm them. They are ready to use and easy to install without assembly required. Base sections can be glued, screwed, or tied down and nearly invisible.
Bird Spikes are ideal for use on ledges, roof lines, parapet walls, eaves, beams, windowsills, light posts, signs and more. The PC base is made from a non-conductive UV protected polycarbonate plastic that is not affected by extreme temperatures and will not break.
Humane - will not harm birds; Low cost effective solution that is virtually invisible.
Easy to install - can be glued, screwed, or tied down; Will not cut or injure installer.
One time solution- no maintenance required.
Installation
Step 1: Be sure that the area is clean, dry and free from bird droppings.
Step 2: Choose the tools you plan to use according to the base condition:
A. If using on a wooden or concrete surface, simply use the screw.
B. If using on a plastic surface, the spikes can be fixed in place with glue, plastic ties, or installation clamp.
Step 3: The first row of spikes are pasted on the front of the surface, so that it is fully protected by the spikes.
Step 4: Immediately replace the damaged spike before the birds move in.
</template>
