 |
SHPC-41
SH
| Quantity: | |
|---|---|
The spikes are not harmful – just extremely irritating, intimidating, and uninviting.
Effective when installed parallel to ground with spikes pointing upwards so birds do not land on that area.
Not suitable to block entrances where birds fly through – rather use mesh/netting.
Clear, light-weight, low-profile.
One-time solution – no maintenance required.
4 spike pre-assembled in50cm strips.
Stainless steel high grade wires on a Polycarbonate UV stabilised base.
4 Spike – protects ledges up to 200mm wide.
Spikes sold per piece(50cm).
What will it repel?
*Pigeons
*Sparrows and Starlings
*Crows and Blackbirds
*Grackles, Swallows
*Large Birds (Seagulls, Geese, and Turkey Vultures)
Where will be used？
Rooftops & ledges
Windowsills, louvers & eaves
Support structures,
beams & rafters
Chimneys & air conditioners
Signs & billboards
Specification
Base length | 50cm/ 19.7inches | Material | Stainless steel (AISI 201.304.316) |
Base width | 2cm/0.8inches | Color | Metal |
Diameter of spike | 1.3mm | Application Type | Physical Barrier |
Length of spike | 11cm/4.3inches | Pest Type | Birds, pigeon |
Spike number | 40 spikes | protection range | 13cm/5.1inches |
Installation
Step 1: Be sure that the area is clean, dry and free from bird droppings.
Step 2: Choose the tools you plan to use according to the base condition:
A. If using on a wooden or concrete surface, simply use the screw.
B. If using on a plastic surface, the spikes can be fixed in place with glue, plastic ties, or installation clamp.
Step 3: The first row of spikes are pasted on the front of the surface, so that it is fully protected by the spikes.
Step 4: Immediately replace the damaged spike before the birds move in.
