 |
SHPC-71
SH
| Quantity: | |
|---|---|
Specification
Base length | 48cm/ 18.9 in | Material | Stainless steel (AISI201.304.316) |
Base width | 5cm/2.0 in | Color | Metal |
Diameter of spike | 1.5mm | Application Type | Physical Barrier |
Length of spike | 11cm/4.3 in | Pest Type | Birds, pigeon |
Spike number | 36 spikes | protection range | 18cm/3.1in |
The spikes are not harmful – just extremely irritating, intimidating, and uninviting
Effective when installed parallel to ground with spikes pointing upwards so birds do not land on that area
Not suitable to block entrances where birds fly through – rather use mesh/netting
Clear, light-weight, low-profile
One-time solution – no maintenance required
3 spike pre-assembled in 50cm strips
Stainless steel high grade wires on a Polycarbonate UV stabilised base
3 Spike – protects ledges up to 210mm wide
What will it repel? | where will be used？ Rooftops & ledges Windowsills, louvers & eaves Support structures, beams & rafters Chimneys & air conditioners Signs & billboards |
Installation
Step 1: Be sure that the area is clean, dry and free from bird droppings.
Step 2: Choose the tools you plan to use according to the base condition:
A. If using on a wooden or concrete surface, simply use the screw.
B. If using on a plastic surface, the spikes can be fixed in place with glue, plastic ties, or installation clamp.
Step 3: The first row of spikes are pasted on the front of the surface, so that it is fully protected by the spikes.
Step 4: Immediately replace the damaged spike before the birds move in.
