 |
| Quantity: | |
|---|---|
Cable suspension clamp is used for attaching strands to corner poles, with a 5/8″ through bolt to support messenger cable at poles with angular runs. The clamp consists of two mating plates, and two 5/8″-11 track bolts with attached square nuts.
Parts No. | Description | Material | Strand size |
CW-CSC | Corner suspension Cable clamp | Steel galvanized | 1/4″-7/16″ |
Applystrand sizes 1/4″ through 7/16″
Supports angles up to 30 degrees
Use with a 5/8″ diameter bolt.
Galvanized steel
